Shower Tile Installation
in Naples, FL

Service overview

The shower is where tile work is really tested

A tiled shower is the highest-risk assembly in a home. It gets soaked daily, it hides its own failures behind finish material, and by the time a leak is visible the damage is usually structural. Everything that determines whether a shower lasts twenty years or five is invisible once the tile is on: the pan slope, the membrane, the corner treatment, and how the valve and drain penetrations are sealed.

Titan Builder & Renovation builds showers as engineered wet-room assemblies. We slope the pan correctly to the drain, apply a bonded waterproof membrane over the whole wet area, flood-test before setting a single tile, and detail benches and niches with positive slope so water leaves rather than sits. Then we tile it beautifully — because the finish should be the easy part.

Types of work we perform

• Custom tiled shower pans with correct slope to point or linear drains
• Curbless and barrier-free wet-room construction
• Full-height shower wall tile including large format and slab-look panels
• Recessed niches, corner shelves, and tiled benches with positive slope
• Steam shower assemblies with vapor-rated waterproofing
• Replacement of failed showers including full demolition and substrate repair

Naples conditions

What shower tile installation in Naples actually involves

Naples has the highest concentration of luxury interior spend in Southwest Florida, and flooring is where that spend is most visible. Between Port Royal estates, Old Naples cottages, and Park Shore and Pelican Bay towers, we are usually asked to hold a single uninterrupted floor plane across 3,000 to 6,000 square feet — which puts every layout decision, every transition, and every lippage tolerance under scrutiny.

Substrate and subfloor preparation in Naples

Most Naples homes sit on monolithic post-tensioned or conventional slabs poured close to grade, and older Old Naples and Moorings properties frequently hide two or three generations of previous adhesive, mud beds, and patch work. We test slab moisture with in-situ relative humidity probes before any adhered installation, grind off residual cutback and thin-set, and re-level with a cementitious self-leveling underlayment so the finished floor is flat to industry tolerance rather than following an out-of-plane slab.

Permits, associations, and access

Interior-only flooring replacement inside the City of Naples generally proceeds without a building permit, but Pelican Bay, Park Shore, and Grey Oaks associations require insurance certificates, approved work hours, elevator protection, and sound-attenuation underlayment documentation before a crew can start. We prepare those packages in advance so your first day on site is a work day, not a lobby negotiation.

Neighborhoods we work in: Port Royal, Old Naples, Aqualane Shores, Park Shore, Pelican Bay, Grey Oaks, Moorings, Vineyards.

Residential applications

Shower and wet-room applications

FAQ

Shower tile questions, answered

Do you install shower tile installation in Naples?

Yes — Naples is our home market and the majority of our flooring work happens between Old Naples and Pelican Bay. Shower scopes include pan construction, waterproofing and flood testing, niche and bench detailing, and full wall and floor tile.

How do you know a shower will not leak?

We flood-test it. Once the pan and membrane are complete and before any tile is set, the drain is plugged and the pan is filled and held for 24 hours. If it holds, the assembly is sound; if it does not, the fix costs an afternoon instead of a demolition two years later.

Can you build a curbless shower on a concrete slab?

Yes. It requires either recessing the slab in the shower footprint or raising the surrounding bathroom floor to create the fall to the drain, and a linear drain usually gives the cleanest result. We determine which approach a specific home allows during the site survey, before committing to the design.

Why does grout crack in the corners of a shower?

Because grout is rigid and the corner is a movement joint. Every change of plane — wall to wall, wall to floor, and around the curb — should be filled with color-matched silicone rather than grout, so the joint can move without cracking. Cracked corner grout is usually an installation shortcut, not a materials problem.

Do Naples condo associations require special underlayment under new flooring?

Most Park Shore, Pelican Bay, and Moorings high-rises require a sound-rated underlayment with documented IIC and STC values before approving hard-surface flooring above the first floor. We supply the manufacturer test data with the association submittal and install to the tested assembly.

Can you match new tile to an existing Naples lanai or pool deck?

Usually yes. We source the interior tile and its exterior-grade companion from the same production run where the manufacturer offers one, and where they do not we design a deliberate threshold detail so the change reads as intentional rather than as a mismatch.