Showers & Wet Rooms · Fort Myers, Lee County

Shower Tile Installation
in Fort Myers, FL

Fort Myers homeowners hire Titan Builder & Renovation for shower tile installation because the work is scoped, prepped, and warrantied as one contract. Fort Myers tile projects split between straightforward large-format porcelain in newer homes and careful, detail-heavy work in historic properties where floor heights, door clearances, and original trim all have to be respected. We survey heights before ordering so the finished floor does not fight the doors.

Tiled walk-in shower with waterproofed pan by Titan Builder & Renovation in a Fort Myers, Florida home

Service overview

The shower is where tile work is really tested

A tiled shower is the highest-risk assembly in a home. It gets soaked daily, it hides its own failures behind finish material, and by the time a leak is visible the damage is usually structural. Everything that determines whether a shower lasts twenty years or five is invisible once the tile is on: the pan slope, the membrane, the corner treatment, and how the valve and drain penetrations are sealed.

Titan Builder & Renovation builds showers as engineered wet-room assemblies. We slope the pan correctly to the drain, apply a bonded waterproof membrane over the whole wet area, flood-test before setting a single tile, and detail benches and niches with positive slope so water leaves rather than sits. Then we tile it beautifully — because the finish should be the easy part.

Types of work we perform

  • Custom tiled shower pans with correct slope to point or linear drains
  • Curbless and barrier-free wet-room construction
  • Full-height shower wall tile including large format and slab-look panels
  • Recessed niches, corner shelves, and tiled benches with positive slope
  • Steam shower assemblies with vapor-rated waterproofing
  • Replacement of failed showers including full demolition and substrate repair

Materials & options

Shower tile and waterproofing materials

01

Bonded sheet and liquid-applied waterproofing membranes

02

Pre-sloped foam pans and linear drain assemblies

03

Large format porcelain and slab-look panels for minimal-joint walls

04

Mosaic and pebble shower floors that conform to the pan slope

05

Marble and limestone with sealing and correct white-mortar specification

06

Color-matched silicone at every change of plane in place of grout

Why Titan

Why choose Titan Builder & Renovation for shower tile

Titan Builder & Renovation has been a licensed Florida general contractor since 2011, working across Fort Myers and Southwest Florida on new builds, whole-home remodels, kitchens, bathrooms, and flooring. Flooring is not a side trade for us — it is part of every project we deliver.

  • Every shower flood-tested before tile — the step most installers skip
  • Positive slope engineered into benches, curbs, and niche sills
  • Waterproofing lapped and sealed at corners, valves, and drain flanges
  • Glass, plumbing, and tile coordinated so the finished shower fits and drains correctly
  • Licensed general contractor accountable for the entire assembly, not just the visible tile

Fort Myers conditions

What shower tile installation in Fort Myers actually involves

Fort Myers spans nearly a century of residential construction, from 1920s Edison Park and McGregor bungalows on raised wood-framed floors to Gateway homes built in the last decade on modern slabs. That range is why a single flooring approach does not work here — the prep on a historic McGregor house has nothing in common with the prep in a Gateway great room.

Substrate and subfloor preparation in Fort Myers

Older McGregor and Edison Park homes often have wood subfloors over crawl space or pier foundations, which means we check joist deflection and sheathing thickness before committing to tile, and add a cement backer board or an uncoupling membrane where the assembly needs stiffening. On slab-built homes in Iona, Whiskey Creek, and Gateway, the work is moisture testing, adhesive removal, and self-leveling.

Permits, associations, and access

Permitting splits between the City of Fort Myers and Lee County depending on the address, with historic-district review affecting parts of the McGregor corridor. Interior flooring replacement is generally exempt from permitting, and post-hurricane restoration work is the exception — when flooring is part of a larger repair scope, we pull the permit for the whole job rather than treating the floor separately.

Neighborhoods we work in: McGregor, Whiskey Creek, Gateway, Edison Park, Iona, Fort Myers Beach.

Process

Our shower tile installation process

  1. 1

    Demolition and inspection of framing, substrate, and any concealed water damage

  2. 2

    Pan construction — sloped mud bed or pre-sloped tray set to the drain type

  3. 3

    Waterproofing — bonded membrane across pan, curb, and full wet-area walls

  4. 4

    Flood test held for 24 hours and documented before tile begins

  5. 5

    Tile setting with full mortar coverage in the wet area and aligned niche courses

  6. 6

    Grout, silicone at plane changes, glass installation, and final performance check

Residential applications

Shower and wet-room applications

Primary suite wet rooms combining shower and freestanding tub

Curbless walk-in showers for accessibility and aging in place

Guest and pool bath shower replacement

Failed-shower remediation where water has reached framing or adjacent rooms

Shower Tile Installation detail 1 — Titan Builder & Renovation project near Fort Myers, FLShower Tile Installation detail 2 — Titan Builder & Renovation project near Fort Myers, FLShower Tile Installation detail 3 — Titan Builder & Renovation project near Fort Myers, FL

FAQ

Shower tile questions, answered

Do you install shower tile installation in Fort Myers?
Yes — Fort Myers is one of our busiest flooring markets, from McGregor and Whiskey Creek to Gateway and the beach corridor. Shower scopes include pan construction, waterproofing and flood testing, niche and bench detailing, and full wall and floor tile.
How do you know a shower will not leak?
We flood-test it. Once the pan and membrane are complete and before any tile is set, the drain is plugged and the pan is filled and held for 24 hours. If it holds, the assembly is sound; if it does not, the fix costs an afternoon instead of a demolition two years later.
Can you build a curbless shower on a concrete slab?
Yes. It requires either recessing the slab in the shower footprint or raising the surrounding bathroom floor to create the fall to the drain, and a linear drain usually gives the cleanest result. We determine which approach a specific home allows during the site survey, before committing to the design.
Why does grout crack in the corners of a shower?
Because grout is rigid and the corner is a movement joint. Every change of plane — wall to wall, wall to floor, and around the curb — should be filled with color-matched silicone rather than grout, so the joint can move without cracking. Cracked corner grout is usually an installation shortcut, not a materials problem.
Can you install tile over a wood subfloor in an older Fort Myers home?
Yes, once the assembly is verified. We confirm joist spacing and deflection meet the L/360 requirement for ceramic or L/720 for natural stone, add an appropriate backer or uncoupling membrane, and only then set tile. Where the structure will not support it, we say so and recommend an alternative.
Do you handle flooring as part of storm damage restoration in Fort Myers?
We do, and the sequence matters — the substrate must be verifiably dry before any new floor goes down. We document moisture readings before installation so the finished work is defensible with both the owner and the carrier.

Next step

Get a free shower tile installation estimate in Fort Myers

Send us the rooms, the square footage, and the material you are considering. We will walk the property, check the substrate, and put a written scope and price in front of you — no obligation.